Пом'якшувач води аквафор WaterBoss S550

The Aquaphor WaterBoss S550 water softener almost completely corresponds to the WaterBoss 400 water softener model in terms of its characteristics, but it slightly exaggerates in terms of peak performance and possible salt reserve, it also removes the smell of water (chlorine and hydrogen sulfide). Aquaphor WaterBoss S550 water softener is a joint development of the American plant "Haugue Quality Water International" and the international concern "Aquaphor". WaterBoss S550 aquaphor water softener combines technical solutions proven over the years and technological innovations. The production technology of the ion-exchange resin tank remained unchanged, which allowed to preserve the main advantages, such as the life of the resin equal to ten years and the elimination of channel effects in the middle of the backfill. Aquaphor WaterBoss S550 water softener removes iron from water, provided the concentration of ferrous iron is no more than 10 ml/l, and removes hardness salts at no more than 21 mg-eq.

WaterBoss S550 iron remover and water softener is great for a homestead or a private house with one or two bathrooms, provided no more than four to five people live at the same time, it can also be used in an apartment with the same restrictions. At the same time, the WaterBoss S550 water softener does not take up much space, approximately like a washing machine with a five-kilogram drum, so it can be placed in modern apartments without problems, the main thing is to consider the filtration and softening of water in the apartment at the initial stage repair

It is important to remember during operation that the WaterBoss S550 water softener, like any other equipment, requires regular maintenance and compliance with operating standards. It seems very reasonable, but it's really, really simple: add salt regularly, readjust the readings in the controller after power outages, and clean the ejector once a year. Then your WaterBoss S550 water softener will work for ten years or even longer.

aquaphor Waterboss S550 Technical characteristics:

The WaterBoss S550 has a maximum compensable hardness of 21 mg-eq/l
WaterBoss S550 Maximum Accumulated Hardness 30420 mg-eq
Salt consumption for one regeneration is 1.0-2.0 kg
The peak capacity of WaterBoss S550 is 1.5 m3/h
The working capacity of the WaterBoss S550 is 1.2 m3/h
Regeneration time 30-40 minutes.
Water consumption for one WaterBoss 800 regeneration is 57-65 l
The diameter of the connection to the bypass is 3/4"
WaterBoss 800 valve diameter 3/4”
A possible reserve of salt in the tank is 25 kg
Electrical characteristics of the WaterBoss 800 220 V, 50 Hz
The maximum water temperature is 40 °C
Water pressure in the water supply system (min - max, atm) 1.8 - 8
Pressure loss on the filter at 23 l/min 0.8 bar
WaterBoss S550 base area, cm 32.2 x 43.0 cm
Height, cm 54.4 cm
aquaphor WaterBoss 800 requirements for incoming water:

Hardness up to 21 mg-eq/l
Ferrous iron is not more than 10 mg/l
Trivalent iron is not more than 0.5 mg/l
pH 6-8
Water temperature: +4 - +40 °C
Petroleum products and other organic impurities: up to 1 mg/l - with a higher indicator, mandatory installation of a 20"BB carbon filter before the WaterBoss S550 water softener
Attention: the WaterBoss S550 Aquaphor water softener is connected to the power supply system only through a voltage stabilizer or an uninterruptible power supply unit. Otherwise, the warranty on the electrical parts of the Aquaphor WaterBoss S550 water softener is analyzed