Water softener S800 aquaphor

Water softener WaterBoss S800 P1 waterboss aquaphor.

The Aquaphor WaterBoss S800 P1 water softener almost completely corresponds to the WaterBoss 700 water softener model in terms of its characteristics, but it slightly exaggerates in terms of peak performance and possible salt supply, it also removes the smell of water (chlorine and hydrogen sulfide). Aquafor WaterBoss S800 P1 water softener is a joint development of the American factory "Haugue Quality Water International" and the international concern "Aquafor". WaterBoss S800 P1 aquaphor water softener combines years of proven technical solutions and technological innovations. The production technology of the ion-exchange resin tank remained unchanged, which allowed to preserve the main advantages, such as the life of the resin equal to ten years and the elimination of channel effects in the middle of the backfill. Aquaphor WaterBoss S800 P1 water softener removes iron from water, provided the concentration of ferrous iron is no more than 10 ml/l, and removes hardness salts at no more than 24 mg-eq.

The WaterBoss S800 P1 iron remover and water softener is perfectly suited for a country house or a private house with one or two bathrooms, provided that no more than four to five people live at the same time, it can also be used in an apartment with the same restrictions. At the same time, the WaterBoss S800 P1 water softener does not take up much space, approximately like a washing machine with a five-kilogram drum, so it can be placed in modern apartments without problems, the main thing is to consider the filtration and softening of water in the apartment at the initial stage repair

It is important to remember during operation that the WaterBoss S800 P1 water softener, like any other equipment, requires regular maintenance and compliance with operating standards. It seems very reasonable, but it's really, really simple: add salt regularly, readjust the readings in the controller after power outages, and clean the ejector once a year. Then your WaterBoss S800 P1 water softener will work for ten years or even longer.

Compatibility table of maximum iron + manganese removal parameters and water hardness:

iron + manganese 10 mg/l, then hardness up to 10 mg-eq.

iron + manganese 8 mg/l, then hardness up to 13 mg-eq.

iron + manganese 6 mg/l, then hardness 15 mg-eq.

iron + manganese 4 mg/l, then hardness 18 mg-eq.

iron + manganese 2 mg/l, then hardness up to 21 mg-eq.

iron + manganese 0 mg/l, then hardness up to 24 mg-eq.

aquaphor Waterboss 800 Technical characteristics:

The maximum compensable hardness of WaterBoss S800 P1 is 24 mg-eq/l
The maximum accumulated hardness of WaterBoss S800 P1 is 30420 mg-eq
Salt consumption for one regeneration is 1.15-2.2 kg
WaterBoss 800 has a peak capacity of 2.0 m3/h
The working capacity of WaterBoss 800 is 1.5 m3/h
Regeneration time 30-50 minutes.
Water consumption for one WaterBoss S800 P1 regeneration is 57-95 l
The diameter of the connection to the bypass is 1"
Valve diameter WaterBoss S800 P1 1”
A possible reserve of salt in the tank is 65 kg
Electrical characteristics of the WaterBoss 800 220 V, 50 Hz
The maximum water temperature is 40 °C
Water pressure in the water supply system (min - max, atm) 1.8 - 8
Pressure loss on the filter at 23 l/min 0.8 bar
The area of the WaterBoss S800 P1 base is 40.4 x 48.5 cm
Height, cm 70.6 cm
aquaphor WaterBoss S800 P1 requirements for incoming water:

Hardness up to 24 mg-eq/l
Ferrous iron is not more than 10 mg/l
Trivalent iron is not more than 0.5 mg/l
pH 6-8
Water temperature: +4 - +40 °C
Oil products and other organic impurities: up to 1 mg/l - with a higher indicator, mandatory installation of a 20"BB carbon filter before the WaterBoss 800 water softener
Attention: the WaterBoss S800 P1 Aquaphor water softener is connected to the power supply system only through a voltage stabilizer or an uninterruptible power supply unit. Otherwise, the warranty on the electrical parts of the WaterBoss S800 P1 Aquaphor water softener is analyzed

Aquaphor Profesional offers a wide range of solutions for commercial water treatment applications. We provide expertise and solutions for medical, pharmaceutical, electronics, food and other commercial applications. Aquaphor Professional’s product lines Water Softeners. Medical, pharmaceutical, electronics, food and other commercial applications. Water softener WaterBoss S800 P1 waterboss aquaphor. Aquaphor Models 800 have fully automatic processor control and demonstrate exceptional salt efficiency and high iron removal. Innovative Dual Core Valves increase regeneration. Efficient and durable softener tank contains extra fine mesh, tightly compacted, chlorine resistant ion-exchange resin.

Water softener WaterBoss S800 P1 waterboss aquaphor

Exceptional salt efficiency
Removal of high concentration of Fe (up to 15 ppm);
10-year warranty;
Made in the USA;
NSF certification pending

Aquaphor S800 P1 contains 23 litres of ion-exchange resin